A water-based interior wall finish designed for a smooth, clean and uniform appearance.
Suitable for homes, shops and commercial interiors where consistent coverage and neat finish matter.
Finish: Smooth, luxury-looking interior finish
Base: Water-based formula for easy application
Application: Brush / Roller / Spray supported
Best For: Interior walls in dry to moderate conditions
Ideal for interior wall surfaces on new plaster or repainted walls.
For best results, use proper surface preparation and a compatible primer/putty system.
Maintain a clean application process for uniform finish and better coverage.
Application Guide (Practical)
Surface Cleaning: Ensure the wall is free from dust, loose paint, oil/grease and moisture.
Filling: Fill dents/cracks and level the surface using putty; smooth with sandpaper after drying.
Priming: Apply one coat of primer on fresh plaster and allow it to dry properly (about 4 hours).
Top Coat: Apply 2–3 coats. Keep a gap of 4–6 hours between coats for a neat finish.
Dilution Tip: Use clean water as per site requirement—avoid over-thinning to maintain coverage.
Note: Actual coverage and drying may vary depending on wall condition, porosity, weather and application method.
For dealer/bulk orders, ask us for packing options and shade guidance.
Need Paint for Home, Project or Dealership?
Get the right interior or exterior paint solution with proper primer and surface guidance.
We support retail customers, contractors and dealers with reliable supply.
