Freshee Interior Wall Primer is a water-thinnable primer that improves adhesion and helps the
topcoat perform better. It reduces patchy appearance, supports uniform absorption and creates a
cleaner base for interior emulsion/distemper finishes.
New plaster walls (after proper curing) and interior cement surfaces
Repainting interiors (after removing loose paint and dust)
Before interior emulsions / distempers to improve finish and coverage
Application Guide (As per Practical Label Steps)
Cleaning: Prepare the surface by sanding with Sand Paper 180 and wipe clean.
Primer Mix: Thin with water in 1:1 ratio (by volume) to get brushable consistency.
1st Coat: Apply one coat and allow to dry for 3–4 hours.
Putty (if required): Smooth the surface using putty, dry for 4–6 hours, then sand with Sand Paper 220.
2nd Coat (recommended): Apply a second coat to avoid patchiness, dry for 3–4 hours.
Final Sanding: Sand with Sand Paper 320 before applying the topcoat.
Maintenance tip: For best performance, keep the painted surface clean and address fungal/algal growth
periodically if present (especially in damp areas).
Need Paint for Home, Project or Dealership?
Get the right interior or exterior paint solution with proper primer and surface guidance.
We support retail customers, contractors and dealers with reliable supply.
